월요일, 12월 2, 2024
HomeHikingHoka Kaha 2 Frost GTX: A Closer Look at Insulation and ...

Hoka Kaha 2 Frost GTX: A Closer Look at Insulation and …


Hoka Kaha Frost 2 Review First Impressions

The Hoka Kaha 2 Frost GTX is a 400g insulated winter hiking mid boot rated down to -25F. Warm and waterproof, its an interesting alternative to both calf-height insulated 400g winter hiking boots. But when evaluating insulated hiking footwear, you need to consider your entire winter footwear system, including insulation, traction, and flotation. Chances are you’ve invested a considerable sum in gaiters, microspikes, crampons, and snowshoes…or you will..so you’re going to want footwear that can gracefully interoperate with those components. 

RELATED: 10 Best Winter Hiking Boots

  • The Kaha 2 Frost GTX has a Vibram megagrip sole, 400 grams of insulation, an aluminum reflective sock liner, and Gore-tex membrane.
  • A pair of men’s 10.5 US, runs slightly small and weighs 2 lbs 10 oz
  • The boots are about an inch longer (13″) than 10.5M Oboz Bridger 10″ 400g boots in the same size and an inch wider (4.5″).
  • The rear soles are widely flared like most Hoka’s.
  • There’s a narrow front-toe kick.
  • The soles are flat, although there’s a decent rocker. But there are no attachment points for gaiters, including no front gaiter ring and no protruding ridge in the back to hold down a snowshoe strap.

Insulation

The Kaha 2 Frost GTX is insulated with 400g insulation, which puts it into the same class of insulation as Oboz Bridger 10″ and Keen Revel IV 400g insulated winter boots which will keep your feet from turning into popsicles in subzero weather. Both of those boots, the leading winter boots used by many winter hikers, are calf-high boots and not mids (mid-height). The higher added leg coverage makes them warmer than insulated mids, which is something to consider.

The 400g designation means that 400g/square meter insulation is used in the boots, not that they have 400 grams of insulation. If they did, they’d be as heavy as cinderblocks. This is a common mistake made by the marketing folks who write product descriptions. Hoka rates these down to -25F, but that assumes you’re hiking vigorously and not standing around waiting for SAR to arrive to evacuate your buddy who’s broken a leg.

I just learned that these boots only have 200g insulation in them instead of 400g. Whoever wrote the product description for the Hoka website assumed that 200g x 2 shoes = 400g. I don’t think I’ve ever encountered a company so inept or deceptive in how they market their insulated footwear. This is just wrong…on so many levels!

Traction

A lot has been written about Vibram megagrip and how great it is for climbing applications, but none of that is going to matter at all when hiking on snow or ice. The only thing that might matter is the lug depth when hiking on packed snow, and that is kind of ho-hum on the Kaha 2 Frost. It’s what you’d expect on a 3-season trail runner. Deeper lugs would provide more traction.

Testing traction and snowshoe compatibility
Testing traction and snowshoe compatibility

Traction Aids

If you need traction on a winter hike, you’re going to be carrying and using one or more of the following traction aids that are compatible with soft-soled footwear.

How well does the Kaha 2 Frost GTX play with the binding systems of these various traction aids?

  • Hillsound Trail Crampons: The pair I normally use (with Oboz Bridger 10″ boots) barely fit over the extra long and wide sole of the Kaha 2 Frost GTX. But more importantly, the front presses down uncomfortably on the Kaha’s toe Box. I’ve seen this before on other winter boots that don’t have beefy toe kicks that can resist the compression exerted on them by an elastomer harness. It results in toe blistering, discomfort, and cold, since the toe box is compressed, reducing blood circulation.
  • Kahtoola K10 Crampon. Non-starter. The back of the binding does not fit over the rear flared heel of the Kahas. The boots also are too long for the flexible leaf spring (center bar).
  • Hillsound Trail Crampon Pro. Non-Starter. The back of the binding does not fit over the rear flared heel of the Kahas, and the front does not fit either. The boots are also too long for the center bar.
  • Grivel G1 Crampon: Non-Starter. The boots are also too long for the flexible leaf spring (center bar). The back binding assumes a vertical, not a flared heal, and doesn’t work.

Net. Net. The Kaha 2 Frost GTX doesn’t work with these popular traction aids. That’s a problem since I wear them over 50% of the time when hiking up and down mountains. Your mileage may vary.

The soft front toebox collpases under the tension of an elastomer harness
The soft front toebox collpases under the tension of an elastomer harness

Flotation

The only snowshoes I have on hand are MSR Evo Ascents with traditional 3-strap ski bindings. These tend to work with any kind of boot, including mammoth mountaineering boots and they worked surprisingly well with the Kaha’s. I still want to test them with snowshoe binding from Tubbs, MSR, and Atlas,

Preliminary Impressions

I’m underwhelmed by the Hoka Kaha 2 Frost GTX winter boots. The lack of compatibility with traction aids gives me pause. The rear flared sole, which is Hoka’s signature feature, is also its greatest liability. If you can stand the toe compression caused by an elastomer harness and you have a compatible snowshoe binding, these might be suitable for winter hiking…but if you’re going to pay $280 for a pair of insulated winter hiking boots, I’d get a pair that works with any traction aid or snowshoe and give these Hokas a pass.

 

 

SectionHiker is reader-supported. We only make money if you purchase a product through our affiliate links. Help us continue to test and write unsponsored and independent gear reviews, beginner FAQs, and free hiking guides.



Source link

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments